A Note About Copyright

I hold the copyright to all images on this blog, unless otherwise noted. Please do not reproduce them without my permission. If you plan on using my material in another blog, I'd be delighted, but please notify me before you do so, and, of course, link back to me. Thank you.
Showing posts with label pendant. Show all posts
Showing posts with label pendant. Show all posts

August 5, 2018

Cat Claw Knot for Donut Pendants

You have a nice donut bead/stone and want to wear it as a pendant but do not know how to present it better?
Today I will show how to make a Cat Claw Knot . 
 The lenght of the cord you will need to cut depends of the size of the donut/bead you have and the thickness of the cord you use. This knot can be made with any type of cord or thread that is flexible enough to be folded - leather, hemp or other fiber cords.

If the object you are tying the knot on has a front or back, decide which side you like best.
Turn the donut so the back side is facing you.
1) Fold the cord in half. Pull the folded loop through the donut  hole as shown.
2) Slip the cord ends through the loop. Pull the ends. Make sure that cords are not crossing.
Turn over the stone so the top of the loop is facing you now, like on the photo below. Now, you will hold your donut this way, front side facing you:
 3) Take one cord end (right on the picture) and pass it to the right, back through the loop. Leave a small loop on top, big enough to fit a cord. Make sure all cords are parallel as shown:
 4) Repeat the same step with the left cord end. You knot has to look like this:
5) Pick up the right cord end and pass it through the left loop as shown:
 6) Pull the cord. Notice, the cord is crossing the horizontal cord on the top of the stone:
 7) Pick up the left cord end and pass it through the right loop as shown:
 8) Tighten the cords:
The result will look different with different cords. I like the leather cord better, but this is my personal choice :) 

August 19, 2011

Itsy Bitsy Spider

Everybody knows a popular nursery rhyme that describes the adventures of Itsy Bitsy Spider :
The itsy bitsy spider climbed up the water spout.
Down came the rain, and washed the spider out.
Out came the sun, and dried up all the rain,
and the itsy bitsy spider went up the spout again.
I wanted to make my own Itsy Betsy Spider with beads and, of course, wire!
So, this pair of grass spider earrings was made. They have 8 legs like all spiders have. I think they are cute and not scary at all :)

I could not stop now. These little creatures asked me about Big Friend. Well, you wish is my command :)
Big Friend could be now friendly Tarantula spider. Do not laugh and do not be afraid- my jewelry pieces are not poison:) ... and this spider came out 3-dimentional! And it is a brooch!
 Look at these guys!Aren't they adorable ? :) They could be the perfect jewelry (or gift) not only for Halloween :)

If you want to make your own spiders, you can buy step-by-step spider earrings and Spider Brooch tutorials at my AroundBeads Etsy store .

May 25, 2011

Necklace-Transformer

When people hear the name of this necklace, Necklace-Transformer, they always smile :) Maybe they think about movie 'Transformers' or about a device that transfers electrical energy. But non of them above:)
You can wear this jewelry in two different ways: as a long necklace on a single chain, or like a choker on a double chain.
 The fun part when I make this necklace is to make a tassel. It is like to put puzzle together. I play with gems, beads, chains, and findings (bead cups, charms,spacers, etc).

May 13, 2011

Chain Mail Bezel for Coins and More

Not long ago, I found 5 ruble coin at home (I guess, I brought it from my last visit of Russia). Turning it in my hands, I decided to make something with it since I cannot spend it  here anyway:) Besides, coin jewelry has been popular since coinage began. 
5 ruble coin with a double eagle on reverse is 1 inch (25 mm) in diameter, so it could be a good pendant. I  did not want to make any holes in it, so the chain mail bezel should work. 

 Silver plated jump rings are woven so that they hold the coin firmly in place.
Diameter of the pendant is 1 3/8" (35mm).
You will not believe, just  after making this "Russian" pendant, my daughter found a genuine Canadian Elizabeth Head Penny 1966 coin. I wanted to make a bezel for it too!

April 14, 2011

Little Suns for Good Mood

I got new gold tone brass wire a couple weeks ago from Wire-Sculpture.com. It really looks like real gold filled wire, not like yellow brass. I love to play with it! I want to show you the result :)
First, I made Sunny Earrings on golden chains (yes, it's the same pattern for my North Star Earrings).


March 30, 2011

New series of DVD "Coiling and Weaving Wire Jewelry Designs"

I am happy to announce the release of the latest jewelry instructional DVD Series, featuring my Coiling and Weaving Wire Jewelry Designs!
In DVD 1 you will learn how to make Coil Drop Earrings & Arabian Bracelet:
 DVD 2 - Sprig Earrings & Moonlight Pendant:
DVD 3 - Golden Medallion Pendant and Viking Knit Chain
Do you want to see the prototypes of those jewelry made in copper?

March 15, 2011

My New Tutorial and more

I was busy last couple days writing my new tutorial. This is 2 -in-1 instruction: how to make secure kidney ear wire and how to make wire capped bead and use it for making earrings, pendants, etc.






 While I was working on this tutorial, I made a couple of jewelry sets that I really love! :)

This earth tone natural picture jasper beads make a good combination with crystal silver  rondelles. I could not stop and make just a pair of earrings - I made a matching pendant, so all feel happy together :).

March 1, 2011

Giveaway #1. Closed

This is my first giveaway on my blog. You have a chance to win a set of handmade polymer clay pendant with earrings.


I will also add an extra gift, but that is a surprise you will get to see only when you unwrap your package.

Mandatory entry: 
Visit Aroundbeads Etsy Shop , browse around, and leave a comment here telling me what your favorite item is! Make sure to include your email address or a way to contact you if you win!

Extra entries (make sure you leave a separate comment for each). Current fans are eligible!
* Follow my blog (you can follow by clicking follow in the left sidebar) - 1 entry
* Follow me on twitter / facebook - 1 entry 
* Share about this giveaway on your facebook or twitter -1 entry
* Blog about this giveaway (include a link to your post) - 1 entry
* Purchase anything from AroundBeads or SuperSupplies4U  shops and come back letting me know what you purchased (use coupon code BLOG10 to get 10% off at AroundBeads shop) - 4 entries

This giveaway will run from March 1st through the 8th, and the lucky winner will be  chosen by random.org on March 9th, 2011. The winner will be announced here, and he or she will have 48 hours to respond with his/her mailing address. If a winner cannot be contacted or does not respond, another winner will be chosen after 48 hours.
Make sure you leave a separate comment for each entry. The more entries you post, the more chances you have to win!


This giveaway is open worldwide.
Have fun and good luck everyone!

February 24, 2011

Little Toys for Big People

I am not a kid, but I still like to play and make little 'toys' with beads. One of my first was this kitty that still lives at my husband's desk.